24/7 Mobile Axle & Spindle Repair | Kentucky, Indiana & Surrounding States | Since 1987
Home › Services › Trailer Spindle Repair
Burned, worn or broken trailer spindle? Axle Surgeons replaces it where the trailer sits, with no new axle and no tow. Open 24 hours.
Open 24 Hours · No New Axle · No Tow · Free Estimates
Trailer spindle replacement means removing the damaged spindle from the trailer axle beam and installing a new one, without pulling the axle out from under the trailer. We work on trailer axles from 10K up to semi trailers, and 10K and 12K axles cover equipment trailers. Axle Surgeons does this at drop yards, customer docks, truck stops and shops, usually the same day or within 24 hours.
Trailers rack up miles fast and often get less wheel-end attention than the tractors pulling them. A leaking hub seal or a loose bearing can go unnoticed until the wheel end is smoking. By then, the spindle under the bearing is usually scored or undersized, and the trailer can't go anywhere.
The usual quote is a new axle. But the axle beam, the suspension mounts and the brakes are typically fine. Only the spindle failed. Axle Surgeons replaces only the spindle, so the rest of the axle stays put. Our customers typically save $700 to $2,000 compared with replacement, and the trailer gets back into rotation fast.
Catch these early and a bearing job stays a bearing job. If you see any of them, call 866-233-9555 for a free estimate.
A hot or smoking hub after a run
Hub oil leaking onto the wheel or tire
A wheel that wobbles or has play when you rock it
A bearing that won't stay adjusted
Uneven wear on one trailer tire
A spindle that's visibly scored, stepped or broken

Pull over as soon as a hub smokes. Every extra mile adds damage. Axle Surgeons replaces the spindle where the trailer sits, so there's no tow and no new axle.
Open 24 hours. Free estimates.
Axle Surgeons repairs trailer axle spindles on the trailers that keep our region's freight moving:
Highway freight trailers. We replace the spindle with the axle still under the trailer.
No new axle
No tow
Free estimate
Refrigerated trailers. We come to the reefer, so the load doesn't wait on a tow and a shop.
No new axle
No tow
Free estimate
Open-deck trailers, repaired at the yard, the customer's dock or the roadside.
No new axle
No tow
Free estimate
Lowboys and heavy-haul trailers, repaired where they're parked.
No new axle
No tow
Free estimate
Equipment trailers. We check the beam and replace only the damaged spindle.
No new axle
No tow
Free estimate
Tanker trailers, repaired at the yard or the customer's site with permission.
No new axle
No tow
Free estimate
Call 866-233-9555 with the trailer location, trailer type and which axle and side failed. Photos help. You'll get a free estimate and an honest arrival time.

Every trailer spindle job includes the same steps, done where the trailer sits:
Tell us where the trailer is and which axle failed, and you get a price range and an honest arrival time.
We check the axle beam for straightness and cracks and measure the spindle damage.
The damaged spindle is cut off cleanly, with the axle still under the trailer.
The beam end is machined true, and the new spindle is installed and welded in place.
We verify alignment and bearing fit, and the trailer is ready to be put back in service.
Every trailer spindle repair follows the same six steps, done right where the trailer sits.
Step 1. Call 866-233-9555 and give us the trailer location, trailer type and which axle and side failed. Photos help.
Step 2. Free estimate and ETA. You get a free estimate and an honest arrival time.
Step 3. Inspect. We check the beam for straightness and cracks and measure the spindle damage.
Step 4. Remove. The damaged spindle is cut off cleanly.
Step 5. Install. The beam end is machined and the new spindle is installed and welded.
Step 6. Check. We verify alignment and bearing fit, and the trailer is ready to be put back in service.
Same day or within 24 hours. Open 24 hours. Free estimates.
We quote every trailer spindle job for free before we start. Replacing the spindle is usually far cheaper than replacing the whole axle, because the beam, suspension mounts and brakes stay. The price depends on these factors.
Spindle size and trailer axle type
Whether the hub, bearings or seals also need replacing
Location and time of day
Site access at the yard or dock

One trailer down at a customer's dock is a missed load and often a detention bill. Kentucky and Indiana are full of distribution centers, drop yards and manufacturing plants along I-65, I-64, I-69, I-70 and I-75, and trailers move between them around the clock.
Axle Surgeons fixes the trailer where it sits, so you don't pay to tow a loaded or empty trailer to a shop and wait on an axle. Our crews are based in Kentucky and Indiana and also cover Ohio, Illinois, West Virginia, Michigan, the St. Louis area and the Green Bay, Wisconsin area.
Serving Louisville, Southern Indiana and trailer fleets across Kentucky and Indiana. Call 866-233-9555 any time, day or night.
If the beam is straight and sound, replacing only the spindle is usually the faster and cheaper fix. Here is how the two options compare.
Every job gets a free estimate before any work starts.
Most trailer spindle failures start with a hub that ran low on oil, a leaking seal or a loose bearing. A few simple checks at every pre-trip and PM can stop the next one.
Check hub oil level and condition at every pre-trip and PM. Low or dirty oil is where most spindle damage starts.
Replace leaking hub seals right away, before the bearings run dry and start to damage the spindle.
Re-check bearing adjustment after any wheel-end work. A loose bearing wears the spindle fast.
Feel for heat at the hubs at every stop. A hub much hotter than the others needs attention.
Pull over as soon as a hub smokes. Every extra mile adds damage.
If a hub smokes, grinds or wobbles, call 866-233-9555. Catching it early can mean replacing only the spindle.

Catching a spindle problem early can mean replacing only the spindle instead of the whole axle. We fix trailers at your yard, dock or roadside, usually the same day or within 24 hours.
Answers to the questions fleet managers and drivers ask us most about trailer spindle repair. Still have a question? Call 866-233-9555.
Open 24 hours. Free estimates.
Replacing the spindle is usually far cheaper, because the beam, suspension mounts and brakes stay. Our customers typically save $700 to $2,000.
Yes. Axle Surgeons replaces trailer spindles at your yard, a customer dock, a truck stop or the roadside, without removing the axle.
Yes. The suspension type doesn't change the spindle repair itself.
Most take a few hours once we're on site. Arrival is usually the same day or within 24 hours.
Not always. Tell us whether the trailer is loaded when you call, and we'll tell you what's needed for that job.
Trailers with axles from 10K up to semi trailers. 10K and 12K axles cover equipment trailers. We also work on dry vans, reefers, flatbeds, step-decks, tankers and lowboys.
Yes, with the site's permission.
Yes. Call 866-233-9555 any time.
On-site axle and spindle repair, 24 hours a day. Free estimates.
THE ORIGINAL

The Original Axle Surgeons, Inc. Family owned and operated, third generation, since 1987. On-site quality service across Kentucky, Indiana and surrounding states. Open 24 hours.
© 2026 Axle Surgeons. All rights reserved.
Axle Surgeons is also known as Axle Doctor. We work on trucks from 3/4-ton pickups up to semis, and trailers from 10K axles up. We don't repair cars, CV axles or CV joints.