24/7 Mobile Axle & Spindle Repair | Kentucky, Indiana & Surrounding States | Since 1987
Home › Services › Mobile Spindle Repair
Spun bearing, scored spindle or a broken wheel end? Axle Surgeons replaces the spindle with the axle still under the truck. No tow, no new housing. Open 24 hours.
Open 24 Hours · No Axle Removal · Free Estimates
Mobile spindle repair is replacing a damaged axle spindle on-site, without removing the axle. A certified technician cuts off the worn or broken spindle, machines the housing end true and installs a new spindle, right where the truck or trailer sits. Axle Surgeons does mobile spindle repair 24 hours a day, usually the same day or within 24 hours.
A failed spindle is one of the most common reasons a truck or trailer gets parked. The bearing goes, the wheel end heats up, and the spindle underneath gets chewed up. Plenty of shops will quote you a new axle housing for that. In most cases, you don't need one.
The housing is the expensive part of the axle, and it's usually still straight and sound. What's damaged is the spindle at the end of it. Axle Surgeons replaces only the spindle and keeps the housing in service. Our customers typically save $700 to $2,000 compared with replacing the housing, and they skip the tow and the wait for parts.
If you're searching for spindle repair near me or axle spindle repair near me, call 866-233-9555. You'll talk to the family that does the work, get a free estimate and get an honest arrival time.
We replace only the damaged spindle and keep your axle housing in service, right where the unit is parked.
Keeps your axle housing in service
No tow to a shop
Usually same day or within 24 hours
Free estimate before we start
A spindle is the steel shaft on the end of an axle that the wheel bearings and hub ride on. It holds the wheel in place and carries the weight of the load. On drive and trailer axles, the spindle is part of the housing tube end, and that's the spindle we replace. On steer axles, we don't replace the spindle. We repair the axle bore where the king pin goes into the steer axle. The spindle mounts on top of the axle, and the king pin holds it in place.
Because the bearings ride directly on the spindle, a bearing failure almost always damages it. The inner bearing race can spin on the spindle and score the bearing seats. Heat can soften and discolor the steel. In the worst cases the spindle snaps and the wheel end comes off.

Catch these early and a bearing job stays a bearing job. If you see any of them, call 866-233-9555 for a free estimate.
Safety first. If a wheel end is smoking or too hot to touch, stop the unit and call 866-233-9555. Running it farther turns a bearing job into a spindle job.
Check for these during walk-arounds and PM service:
Wheel-end heat, smoke or a burning smell after a stop
Hub wobble, or play when you rock the tire
A bearing that won't hold adjustment after it's been set
Scoring, galling or a stepped bearing seat on the spindle
Blue or dark heat discoloration on the spindle during service
Damaged threads where the spindle nut won't hold torque
Uneven or cupped wear on one tire only
Not sure what you're looking at? Text photos of the wheel end to 866-233-9555 and we'll tell you.

Spindle failure almost always starts at the wheel bearings. When the bearing runs dry, loose or hot, the spindle underneath is what pays for it.
Stopping at the first sign of a hot hub can mean a bearing job instead of a spindle job.
What we see most often on the spindles we replace:
Low, leaking or contaminated hub oil or grease
Incorrect wheel bearing adjustment, too loose or too tight
A failed hub seal that lets lubricant out or water in
Overloaded or overheated wheel ends
Running a hot wheel end too long before stopping

We replace drive and trailer spindles and repair steer axle king pin bores on trucks, semi-trailers, buses and equipment.
From 3/4-ton pickups up to semi trucks, including tractors, straight trucks, dump trucks and refuse trucks. We replace the spindle and keep the drive axle housing in service.
We don't replace steer spindles. We repair the worn king pin bore in the steer axle by sleeving the axle eye.
From 10K axles up to semi trailers. 10K and 12K axles cover equipment trailers. Dry vans, reefers, flatbeds, tankers and lowboys too, with the axle still under the trailer.
Six steps from your call to a wheel end that's ready to go back together.
Step 1: Call and Send Photos. Call 866-233-9555 with the location, unit type and axle position, and text photos of the wheel end.
Step 2: Free Estimate. We give you a price range and an arrival time before we roll.
Step 3: Inspect and Measure. We check the housing for straightness and cracks and measure the spindle damage.
Step 4: Cut Off the Damaged Spindle. The old spindle is removed cleanly from the housing.
Step 5: Machine and Install. The housing end is machined true, and the new spindle is installed and welded in place.
Step 6: Verify. We check alignment and bearing fit so the wheel end can go back together and back to work.
Open 24 Hours • Free Estimates • Usually Same Day or Within 24 Hours
Every spindle job gets a free estimate before we start. Customers typically save $700 to $2,000 compared with replacing the axle housing. The price depends on:
Drive or trailer spindle, or steer axle king pin bore, and the size
Whether the hub, bearings or seals also need replacing
How much work the housing end needs
Location, distance and time of day
What customers typically save compared with replacing the axle housing, plus no tow and no wait for parts.
Free estimate before any work starts.
A truck that loses a spindle on I-65, I-64, I-69, I-70 or I-75 isn't just broken. It's late. Our region moves freight around the clock through Louisville, Indianapolis, Northern Kentucky and dozens of distribution centers, and a parked trailer at a customer's dock can mean a missed load and a detention bill.
Axle Surgeons has crews based in both Kentucky and Indiana, so mobile spindle repair usually happens the same day or within 24 hours. Joe Loudenslager runs Kentucky and Lyal and Kain Loudenslager run Indiana, and the family has more than 30 years in this exact work.
Joe Loudenslager runs our Kentucky crews and Lyal and Kain Loudenslager run Indiana. You talk to the family that does the work, not a call center.
Kentucky: crews based in-state, run by Joe Loudenslager
Indiana: crews based in-state, run by Lyal and Kain Loudenslager
We also travel into Ohio, Illinois, West Virginia, Michigan, the St. Louis area and the Green Bay area
Open 24 hours, 7 days a week. Free estimates.
Here's how the two options usually compare when the housing is straight and the damage is at the spindle.
Not sure which one your unit needs? Call 866-233-9555 and describe the damage. We'll tell you honestly whether the spindle can be replaced on site.
Most spindle failures start as a wheel bearing problem. A few quick checks during walk-arounds and scheduled PMs catch it while it's still a bearing job, before it turns into a spindle job and a roadside call.
Hot hub on the road? Pull over safely and call us before it seizes. Catching it early can mean a bearing job instead of a spindle replacement.
Build these into every walk-around and scheduled PM:
Check hub oil level and condition at every stop and PM
Replace leaking hub seals right away
Re-check bearing adjustment after any wheel-end work
Feel for heat at the hubs during walk-arounds
Stop as soon as a wheel end smokes or smells hot. Running it farther turns a bearing job into a spindle job.
Spindle damage often comes with other axle problems. We fix these on site too.
Cracked axle housing tubes and worn tube ends repaired on site, usually without pulling the axle.
New spindles for semi-trailers, dry vans and reefers, installed where the trailer sits.
Drive, steer and trailer axle repairs done on site, from bearings and spindles to housings.
Straight answers about spindle damage, repair time, cost and where we work. Still have a question? Call us any hour.
It's the fixed, machined shaft on the end of the axle that carries the wheel bearings and hub. If the bearings fail, the spindle is usually what gets damaged.
Yes. Axle Surgeons cuts off the damaged spindle and installs a new one on the existing housing, with the axle still under the truck or trailer.
Most often a bearing failure caused by low or contaminated lubricant, wrong bearing adjustment, a failed seal, or an overloaded or overheated wheel end.
Most spindle replacements take a few hours once we're on site. Arrival is usually the same day or within 24 hours.
In most cases, yes. Customers typically save $700 to $2,000, and they also avoid the tow and the wait for parts.
A properly installed replacement spindle restores the axle to service. Cracked housings can usually be repaired too. We don't straighten bent housings. If the damage is too severe to repair safely, we'll tell you.
Yes. We replace drive spindles on trucks from 3/4-ton pickups up to semis, and trailer spindles from 10K axles up to semi trailers. On steer axles we don't replace the spindle. We repair the king pin bore in the axle.
Yes, with the site's permission. We also work at the roadside when it's safe.
Axle Surgeons covers all of Kentucky and Indiana, plus Ohio, Illinois, West Virginia, Michigan, the St. Louis area and the Green Bay, Wisconsin area. Call 866-233-9555 for an arrival time.
On-site axle and spindle repair, 24 hours a day. Free estimates.
THE ORIGINAL

The Original Axle Surgeons, Inc. Family owned and operated, third generation, since 1987. On-site quality service across Kentucky, Indiana and surrounding states. Open 24 hours.
© 2026 Axle Surgeons. All rights reserved.
Axle Surgeons is also known as Axle Doctor. We work on trucks from 3/4-ton pickups up to semis, and trailers from 10K axles up. We don't repair cars, CV axles or CV joints.